A review on the alternatives to antibiotics and the treatment of antibiotic pollution: Current development and future prospects.

Antibiotics, widely used in the fields of medicine, animal husbandry, aquaculture, and agriculture, pose a serious threat to the ecological environment and human health. To prevent antibiotic pollution, efforts have been made in recent years to explore alternative options for antibiotics in animal feed, but the effectiveness of these alternatives in replacing antibiotics is not thoroughly understood due to the variation from case to case. Furthermore, a systematic summary of the specific applications and limitations of antibiotic removal techniques in the environment is crucial for developing effective strategies to address antibiotic contamination. This comprehensive review summarized the current development and potential issues on different types of antibiotic substitutes, such as enzyme preparations, probiotics, and plant extracts. Meanwhile, the existing technologies for antibiotic residue removal were discussed under the scope of application and limitation. The present work aims to highlight the strategy of controlling antibiotics from the source and provide valuable insights for green and efficient antibiotic treatment.

Copper-decorated strategy based on defect-rich NH2-MIL-125(Ti) boosts efficient photocatalytic degradation of methyl mercaptan under sunlight.

Photocatalysis has received significant attention as a technology that can solve environmental problems. Metal-organic frameworks are currently being used as novel photocatalysts but are still limited by the rapid recombination of photogenerated carriers, low photogenerated electron migration efficiency and poor solar light utilization rate. In this work, a novel photocatalyst was successfully constructed by introducing Cu species into thermal activated mixed-ligand NH2-MIL-125 (Ti) via defect engineering strategy. The constructed defect structure not only provided 3D-interconnected gas transfer channels, but also offered suitable space to accommodate introduced Cu species. For the most effective photocatalyst 0.2Cu/80%NH2-MIL-125 (300 °C) with optimized Cu content, the photocatalytic degradation rate of CH3SH achieved 4.65 times higher than that of pristine NH2-MIL-125 under visible light (λ > 420 nm). At the same time, it showed great degradation efficiency under natural sunlight, 100 ppm CH3SH was completely removed within 25 min in full solar light illumination. The improved catalytic efficiency is mainly due to the synergistic effect of the integrated Schottky junction and rich-defective NH2-MIL-125, which improved the bandgap and band position, and thus facilitated the separation and transfer of the photo-generated carriers. This work provided a facile way to integrate Schottky junctions and rich-defective MOFs with high stability. Due to its excellent degradation performance under sunlight, it also offered a prospective strategy for rational design of high-efficiency catalysts applied in environmental technologies.

Database of emission factors of volatile organic compound (VOC) species in motor vehicle exhaust in China.

The synergistic strategy for fine particulate matter (PM2.5) and O3 pollution prevention and control has emerged as a pivotal approach in combating air pollution. Volatile organic compounds (VOCs) serve as crucial precursors to both O3 and secondary organic aerosols (SOAs), with motor vehicles representing one of their significant sources. In this study, a standard for establishing a database of VOC species emission factors for motor vehicles was developed, and a database containing 134 VOC species was constructed through field tests and literature surveys. The VOC emissions of light-duty gasoline passenger vehicles (LDGPVs) comprised primarily alkanes and aromatics. The VOC emissions of light-duty diesel trucks (LDDTs) comprised mostly alkanes. Regarding low-speed trucks, 3-wheel vehicles, medium-duty diesel trucks (MDDTs) and heavy-duty diesel trucks (HDDTs), their VOC emissions comprised mainly oxygenated volatile organic compounds (OVOCs). The update of emission standards resulted in a reduction in VOC species emission factors while altering the composition of VOCs. Attention should be directed toward isopentane, benzene and dichloromethane emitted by LDGPVs, dodecane, undecane, ethene and propene emitted by LDDTs, and acetaldehyde emitted by HDDTs. VOC species originating from LDGPVs were more dispersed than those originating from LDDTs and HDDTs. In addition, variations in VOC species were observed among motor vehicles with different fuel types. Toluene, ethene, benzene, m,p-xylene, isopentane, hexanal, ethyne and 1,2,4-trimethylbenzene were the predominant VOC species emitted by gasoline vehicles. Diesel vehicles emitted mainly dodecane, formaldehyde, propene, undecane, acetaldehyde, ethene, decane and benzene. The results could enhance our comprehension of the emission characteristics of VOC species originating from motor vehicles and provide data support and a scientific foundation for achieving synergistic PM2.5 and O3 pollution prevention and control.

Natural antibacterial membranes prepared using Schisandra chinensis extracts and polyvinyl alcohol in an environment-friendly manner.

Foodborne pathogens can cause food spoilage and lead to food safety issues. In recent years, food packaging has received a lot of attention. Traditional packaging membranes are non-biodegradable and remain in the environment for a long time. In this study, natural antimicrobial substances were extracted from Schisandra chinensis by a green extraction process using distilled water as the solvent, and the effects of different treatment on the antimicrobial activity of the extract were compared. At the same time, four types of Schisandra chinensis antimicrobial membranes were prepared using polyvinyl alcohol (PVA) as the substrate. The whole extraction and membrane preparation process did not involve organic solvents, making the process green and environment friendly. Material characterization included inverted biological microscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), tensile strength test, pore size measurement, water uptake test, etc. Among them, no extract particles were observed with the naked eye on the surfaces of MⅡ and MⅣ. MⅡ has a uniformly transparent, nearly colorless morphology and is the most tensile. MⅣ surface is flat and smooth, the microstructure is dense and uniform. At the same time, the four types of membranes were tested against common pathogenic bacteria for 12 h, and the OD600 trend revealed the excellent antimicrobial activity of the membranes against S. aureus, MRSA, E. coli, and L. monocytogenes. The membranes could also be reused at least once. This study provides a new idea for preparing natural plant-based antimicrobial membranes.

Antibiotic residues in milk and dairy products in China: occurrence and human health concerns.

Although veterinary antibiotics are essential in preventing and treating clinical diseases in cattle, the frequent use of antibiotics leads to antibiotic residues in milk and dairy products, consequently threatening human health. The massive milk consumption makes it necessary to assess antibiotic pollution and health impact comprehensively. Hence, we conducted a systematic review to evaluate antibiotics in milk and dairy products and their potential health risk. We searched four databases using multiple keyword combinations to retrieve 1582 pieces of literature and finally included eighteen articles to analyze antibiotic residues in milk and dairy products. These studies detected seven antibiotics in different regions of China. Quinolones and ß-lactam antibiotics exceeded the MRL for raw and commercial milk. The maximum levels of sulfonamides and tetracyclines were detected in the same raw milk sample, exceeding the MRL. The estimated THQ and HI values in milk and dairy products are less than 1 for adults, indicating negligible noncarcinogenic health risk of antibiotics through consuming milk and dairy products. Children face higher health risks than adults, with the HI and THQ of quinolones exceeding 1. It is worth noting that quinolones accounted for nearly 89% of health risks associated with all antibiotics. Finally, we put forward possible research directions in the future, such as specific health effects of total dietary exposure to low levels of antibiotics. In addition, policymakers should effectively improve this problem from the perspectives of antibiotic use supervision, antibiotic residue analysis in food, and continuous environmental monitoring and control.

Multidimensional beta-diversity across local and regional scales in a Chinese subtropical forest: The role of forest structure.

Beta-diversity, or the spatio-temporal variation in community composition, can be partitioned into turnover and nestedness components in a multidimensional framework. Forest structure, including comprehensive characteristics of vertical and horizontal complexity, strongly affects species composition and its spatial variation. However, the effects of forest structure on beta-diversity patterns in multidimensional and multiple-scale contexts are poorly understood. Here, we assessed beta-diversity at local (a 20-ha forest dynamics plot) and regional (a plot network composed of 19 1-ha plots) scales in a Chinese subtropical evergreen broad-leaved forest. We then evaluated the relative importance of forest structure, topography, and spatial structure on beta-diversity and its turnover and nestedness components in taxonomic, functional, and phylogenetic dimensions at local and regional scales. We derived forest structural parameters from both unmanned aerial vehicle light detection and ranging (UAV LiDAR) data and plot inventory data. Turnover component dominated total beta-diversity for all dimensions at the two scales. With the exception of some components (taxonomic and functional turnover at the local scale; functional nestedness at the regional scale), environmental factors (i.e., topography and forest structure) contributed more than pure spatial variation. Explanations of forest structure for beta-diversity and its component patterns at the local scale were higher than those at the regional scale. The joint effects of spatial structure and forest structure influenced component patterns in all dimensions (except for functional turnover) to some extent at the local scale, while pure forest structure influenced taxonomic and phylogenetic nestedness patterns to some extent at the regional scale. Our results highlight the importance and scale dependence of forest structure in shaping multidimensional beta-diversity and its component patterns. Clearly, further studies need to link forest structure directly to ecological processes (e.g., asymmetric light competition and disturbance dynamics) and explore its roles in biodiversity maintenance.

Insights into quantitative evaluation technology of PM2.5 transport at multi-perspective and multi-spatial and temporal scales in the north China plain.

Cross-border transport is a crucial factor affecting air quality, while how to quantify the transport contribution through different technologies at multi-perspective and multi-scale have not been fully understood. This study established three quantification techniques, and conducted a systematic assessment of PM2.5 transport over the North China Plain (NCP) based on numerical simulations and vertical observations. Results suggested that the annual local emissions, inter-urban and outer-regional transport contributed 44.5%-64.6%, 15.2%-27.9% and 18.0%-28.2% of total surface PM2.5 concentrations, respectively, with transport intensity stronger in July and April, yet weaker in January and October. The southwest-northeast, northeast-southwest, and southeast-northwest were three prevailing transport directions near the surface. By comparison, the annual PM2.5 transport contribution below the atmospheric boundary layer height increased by 16.8%-24.5% in Beijing, Tianjin and Shijiazhuang, with inter-urban and outer-regional contribution of 29.8%-32.1% and 18.5%-23.1%. Furthermore, observed fluxes from fixed-point and vehicle-based mobile lidar were in good agreement with the simulated flux. PM2.5 net flux intensity varied with height, with generally larger at the middle- and high-altitude layer than that of low-altitude layer. In the early, during and late period of haze peak formation (Stage Ⅰ, Ⅱ, Ⅲ, respectively), the largest absolute flux intensity on average was Stage Ⅱ (566.7 t/d), followed by Stage Ⅲ (307.0 t/d) and Ⅰ (191.4 t/d). Besides, external transport may dominate the second concentration peak, while local emissions may play a more vital role in the first and third peaks. It has been noted that joint prevention and control measures should be proposed 1-2 days before reaching PM2.5 extremes. These findings could improve our understanding of transport influence mechanism of PM2.5 and propose effective emission reduction measures in the NCP region.

Characteristics and reduction assessment of GHG emissions from crop residue open burning in China under the targets of carbon peak and carbon neutrality.

Driven by the goal of carbon peak and carbon neutrality, greenhouse gas (GHG) emissions from the crop residue open burning (CROB) in China cannot be ignored. In this study, we have established a high-resolution (0.05° × 0.05°) GHG emissions inventory (including CO2, CH4, and N2O) of CROB from 2012 to 2021 in China based on the VIIRS data and official statistics. To improve the results accuracy, we compared the two commonly used bases for grid allocation, fire counts (FC) and fire radiative power (FRP), in the construction of high-resolution inventory. In 2012, GHG emissions are overestimated by 599 t CO2e per grid on average in 24,577 grids, and underestimated by 1096 t CO2e per grid on average in 13,546 grids based on FC compared to FRP. Then, we characterized the spatial and temporal distribution of GHG emissions from CROB by using the FRP-based method. From 2012 to 2021, total GHG emissions from CROB in China have decreased by 31.2 %, of which the East and South-Central China contributed 22.51 and 9.12 Tg CO2e of GHG reductions, while the Northeast China contributed 10.73 Tg CO2e of GHG growth, respectively. In addition, GHG emissions from CROB on the time scale are mainly concentrated in April, June, and October, with variations between years and regions influenced by the policy, climate, and farmers' perceptions. Finally, we assessed the GHG emission reductions from CROB under different scenarios in the future. By 2060, GHG emissions would be significantly reduced by 57.3 %-77.9 % compared to 2021 under effective control measures. We believe the results will be of great significance for GHG policy formulation and emission reduction potential assessment.

Enantioselective Behaviors of Chiral Pesticides and Enantiomeric Signatures in Foods and the Environment.

Unreasonable application of pesticides may result in residues in the environment and foods. Chiral pesticides consist of two or more enantiomers, which may exhibit different behaviors. This Review intends to provide progress on the enantioselective residues of chiral pesticides in foods. Among the main chiral analytical methods, high performance liquid chromatography (HPLC) is the most frequently utilized. Most chiral pesticides are utilized as racemates; however, due to enantioselective dissipation, bioaccumulation, biodegradation, and chiral conversion, enantiospecific residues have been found in the environment and foods. Some chiral pesticides exhibit strong enantioselectivity, highlighting the importance of evaluation on an enantiomeric level. However, the occurrence characteristics of chiral pesticides in foods and specific enzymes or transport proteins involved in enantioselectivity needs to be further investigated. This Review could help the production of some chiral pesticides to single-enantiomer formulations, thereby reducing pesticide consumption as well as increasing food production and finally reducing human health risks.

Real-World Emission Characteristics of Full-Volatility Organics Originating from Nonroad Agricultural Machinery during Agricultural Activities.

Nonroad agricultural machinery (NRAM) emissions constitute a significant source of air pollution in China. Full-volatility organics originating from 19 machines under 6 agricultural activities were measured synchronously. The diesel-based emission factors (EFs) for full-volatility organics were 4.71 ± 2.78 g/kg fuel (average ± standard deviation), including 91.58 ± 8.42% volatile organic compounds (VOCs), 7.94 ± 8.16% intermediate-volatility organic compounds (IVOCs), 0.28 ± 0.20% semivolatile organic compounds (SVOCs), and 0.20 ± 0.16% low-volatility organic compounds (LVOCs). Full-volatility organic EFs were significantly reduced by stricter emission standards and were the highest under pesticide spraying activity. Our results also demonstrated that combustion efficiency was a potential factor influencing full-volatility organic emissions. Gas-particle partitioning in full-volatility organics could be affected by multiple factors. Furthermore, the estimated secondary organic aerosol formation potential based on measured full-volatility organics was 143.79 ± 216.80 mg/kg fuel and could be primarily attributed to higher-volatility-interval IVOCs (bin12-bin16 contributed 52.81 ± 11.58%). Finally, the estimated emissions of full-volatility organics from NRAM in China (2021) were 94.23 Gg. This study provides first-hand data on full-volatility organic EFs originating from NRAM to facilitate the improvement of emission inventories and atmospheric chemistry models.

Aflatoxin detection technologies: recent advances and future prospects.

Aflatoxins have posed serious threat to food safety and human health. Therefore, it is important to detect aflatoxins in samples rapidly and accurately. In this review, various technologies to detect aflatoxins in food are discussed, including conventional ones such as thin-layer chromatography (TLC), high performance liquid chromatography (HPLC), enzyme linked immunosorbent assay (ELISA), colloidal gold immunochromatographic assay (GICA), radioimmunoassay (RIA), fluorescence spectroscopy (FS), as well as emerging ones (e.g., biosensors, molecular imprinting technology, surface plasmon resonance). Critical challenges of these technologies include high cost, complex processing procedures and long processing time, low stability, low repeatability, low accuracy, poor portability, and so on. Critical discussion is provided on the trade-off relationship between detection speed and detection accuracy, as well as the application scenario and sustainability of different technologies. Especially, the prospect of combining different technologies is discussed. Future research is necessary to develop more convenient, more accurate, faster, and cost-effective technologies to detect aflatoxins.

Real-world emission characteristics and inventory of volatile organic compounds originating from construction and agricultural machinery.

Volatile organic compound (VOC) emissions originating from nonroad mobile sources constitute an important but uncertain source of secondary organic aerosols (SOAs) and ozone (O3). In this study, we investigated the emission factors (EFs) of 120 individual VOC species for 40 machines via gas chromatography-mass spectrometry/flame ionization detection and high-performance liquid chromatography. The results showed that the diesel-based VOC EF for the tested machines was 4.18 ± 2.55 (average ± standard deviation) g/kg fuel, dominated by alkanes (38.20 % ± 18.08 %) and oxygenated VOCs (OVOCs; 30.94 % ± 15.71 %). The machine type, rated power, emission standards, and operating conditions affected the emissions of VOCs and their components, and this effect maybe mostly depends on the fuel combustion efficiency. The VOC species were primarily distributed in the C1-C2 and C4-C6 (based on the carbon number) and B4-B6 (based on the saturated vapor concentration) intervals. Furthermore, the estimated formation potential (FP) values of SOAs and O3 from VOCs were 21.02 ± 15.57 mg/kg fuel and 15.96 ± 11.87 g/kg fuel, respectively. VOC control based on the SOA formation potential (SOAFP) and ozone formation potential (OFP) could be more effective in the mitigation of fine particulate matter (PM2.5) and O3 pollution because the top 5 species ranked by percentage contribution accounted for 83.09 % ± 9.59 % and 51.78 % ± 14.38 % of the estimated SOAFP and OFP, respectively. Finally, the emission estimates showed that the VOC emissions originating from construction and agricultural machinery in China (2020) reached 64.05 and 95.24 Gg, respectively. We provide species-specific VOC EFs and detailed emission characteristics to facilitate a comprehensive understanding of gas emissions originating from nonroad mobile sources and an update of emission inventories and atmospheric chemistry models.

Synthesis and application of quantum dots in detection of environmental contaminants in food: A comprehensive review.

Environmental pollutants can accumulate in the human body through the food chain, which may seriously impact human health. Therefore, it is of vital importance to develop quick, simple, accurate and sensitive (respond quickly) technologies to evaluate the concentration of environmental pollutants in food. Quantum dots (QDs)-based fluorescence detection methods have great potential to overcome the shortcomings of traditional detection methods, such as long detection time, cumbersome detection procedures, and low sensitivity. This paper reviews the types and synthesis methods of QDs with a focus on green synthesis and the research progress on rapid detection of environmental pollutants (e.g., heavy metals, pesticides, and antibiotics) in food. Metal-based QDs, carbon-based QDs, and "top-down" and "bottom-up" synthesis methods are discussed in detail. In addition, research progress of QDs in detecting different environmental pollutants in food is discussed, especially, the practical application of these methods is analyzed. Finally, current challenges and future research directions of QDs-based detection technologies are critically discussed. Hydrothermal synthesis of carbon-based QDs with low toxicity from natural materials has a promising future. Research is needed on green synthesis of QDs, direct detection without pre-processing, and simultaneous detection of multiple contaminants. Finally, how to keep the mobile sensor stable, sensitive and easy to store is a hot topic in the future.

Chemical characterization of volatile organic compounds (VOCs) emitted from multiple cooking cuisines and purification efficiency assessments.

Cooking process can produce abundant volatile organic compounds (VOCs), which are harmful to environment and human health. Therefore, we conducted a comprehensive analysis in which VOCs emissions from multiple cuisines have been sampled based on the simulation and acquisition platform, involving concentration characteristics, ozone formation potential (OFP) and purification efficiency assessments. VOCs emissions varied from 1828.5 to 14,355.1 µg/m3, with the maximum and minimum values from Barbecue and Family cuisine, respectively. Alkanes and alcohol had higher contributions to VOCs from Sichuan and Hunan cuisine (64.1%), Family cuisine (66.3%), Shandong cuisine (69.1%) and Cantonese cuisine (69.8%), with the dominant VOCs species of ethanol, isobutane and n-butane. In comparison, alcohols (79.5%) were abundant for Huaiyang cuisine, while alkanes (19.7%), alkenes (35.9%) and haloalkanes (22.9%) accounted for higher proportions from Barbecue. Specially, carbon tetrachloride, n-hexylene and 1-butene were the most abundant VOCs species for Barbecue, ranging from 8.8% to 14.6%. The highest OFP occurred in Barbecue. The sensitive species of OFP for Huaiyang cuisine were alcohols, while other cuisines were alkenes. Purification efficiency assessments shed light on the removal differences of individual and synergistic control technologies. VOCs emissions exhibited a strong dependence on the photocatalytic oxidation, with the removal efficiencies of 29.0%-54.4%. However, the high voltage electrostatic, wet purification and mechanical separation techniques played a mediocre or even counterproductive role in the VOCs reduction, meanwhile collaborative control technologies could not significantly improve the removal efficiency. Our results identified more effective control technologies, which were conductive to alleviating air pollution from cooking emissions.

Reduced rural residential emissions in the Northern China Plain from 2015 to 2021.

China's rapid economic growth over the past few decades has been fueled by the fossil-fuel dominated energy system. In Northern China, coal and biomass are important fuel types for household cooking and heating. The use of coal and biomass not only contributes to CO2 emissions, but also worsens the ambient air quality and further causes adverse health outcomes. Since 2016, action plans have been implemented annually to promote the substitution of solid fuel use in the rural households of the Beijing-Tianjin-Hebei and surrounding region ("2 + 26" region). However, a comprehensive evaluation of the emission reductions by the control policies is still lacking. In this study, we built a rural residential emission inventory in the "2 + 26" region based on two-phase national household surveys in 2010 and 2015. We evaluated the air pollutant and CO2 reduction benefits of various control measures from 2015 to 2021 and discussed the opportunities for the synergistical control of air pollutant and CO2 emissions. We estimated that, in 2015, the coal and biomass fuel consumption from rural households in the "2 + 26" region was 28.7 Mt. and 30.6 Mt., respectively, which resulted in 93.8 Mt., 416.5kt, 402.5kt, 80.1kt, 268.0kt, and 6122.2kt of CO2, PM2.5, SO2, NOx, VOCs, and CO emissions. With the implementation of household solid fuel substitution policies, air pollutant emissions were estimated to decrease by 53- 74 % from 2015 to 2021, while the percentage reduction of CO2 was only 39 % due to additional emissions from the alternative clean energy sources. If biomass was treated as carbon-neutral fuel, the CO2 reducing potential was even lower. Building a clean and sustainable rural energy system is a multi-win option for China to achieve the "Beautiful China", "Healthy China" and carbon-neutrality goals.

Real-world emission characteristics of semivolatile/intermediate-volatility organic compounds originating from nonroad construction machinery in the working process.

Detailed emission characterization of semivolatile/intermediate-volatility organic compounds (S/IVOCs) originating from nonroad construction machines (NRCMs) remains lacking in China. Twenty-one NRCMs were evaluated with a portable emission measurement system in the working process. Gas phase S/IVOCs were collected by Tenax TA tubes and analyzed via thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS). Particle phase S/IVOCs were collected by quartz filters and analyzed via GC-MS. The average emission factors (EFs) for fuel-based total (gas + particle phase) IVOCs and SVOCs of the assessed NRCMs were 221.45 ± 194.60 and 11.68 ± 10.67 mg/kg fuel, respectively. Compared to excavators, the average IVOC and SVOC EFs of loaders were 1.32 and 1.55 times higher, respectively. Compared to the working mode, the average IVOC EFs under the moving mode (only moving forward or backward) were 1.28 times higher. The IVOC and SVOC EFs for excavators decreased by 69.06% and 38.37%, respectively, from China II to China III. These results demonstrate the effectiveness of emission control regulations. In regard to individual NRCMs, excavators and loaders were affected differently by emission standards. The volatility distribution demonstrated that IVOCs and SVOCs were dominated by gas- and particle-phase compounds, respectively. The mode of operation also affected S/IVOC gas-particle partitioning. Combined with previous studies, the mechanical type significantly affected the volatility distribution of IVOCs. IVOCs from higher volatile fuels are more distributed in the high-volatility interval. The total secondary organic aerosol (SOA) production potential was 104.36 ± 79.67 mg/kg fuel, which originated from VOCs (19.98%), IVOCs (73.87%), and SVOCs (6.15%). IVOCs were a larger SOA precursor than VOCs and SVOCs. In addition, normal (n-) alkanes were suitably correlated with IVOCs, which may represent a backup solution to quantify IVOC EFs. This work provides experimental data support for the refinement of the emission characteristics and emission inventories of S/IVOCs originating from NRCMs.

Real-world emission characteristics of carbonyl compounds from agricultural machines based on a portable emission measurement system.

Emissions of carbonyl compounds from agricultural machines cannot be ignored. Carbonyl compounds can cause the formation of ozone (O3) and secondary organic aerosols, which can cause photochemical smog to form. In this study, 20 agricultural machines were tested using portable emission measurement system (PEMS) under real-world tillage processes. The exhaust gases were sampled using 2,4-dinitrophenylhydrazine cartridges, and 15 carbonyl compounds were analyzed by high-performance liquid chromatography. Carbonyl compound emission factors for agricultural machines were 51.14-3315.62 mg/(kg-fuel), and were 2.58 ± 2.05, 0.86 ± 1.07 and 0.29 ± 0.20 g/(kg-fuel) for China 0, China II and China III emission standards, respectively. Carbonyl compound emission factor for sowing seeds of China 0 agricultural machines was 3.32 ± 1.73 g/(kg-fuel). Formaldehyde, acetaldehyde and acrolein were the dominant carbonyl compounds emitted. Differences in emission standards and tillage processes impact ozone formation potential (OFP). The mean OFP was 20.15 ± 16.15 g O3/(kg-fuel) for the China 0 emission standard. The OFP values decreased by 66.9% from China 0 to China II, and 67.4% from China II to China III. The mean OFP for sowing seeds of China 0 agricultural machines was 25.92 ± 13.84 g O3/(kg-fuel). Between 1.75 and 24.22 times more ozone was found to be formed during sowing seeds than during other processes for China 0 and China II agricultural machines. Total carbonyl compound emissions from agricultural machines in China was 19.23 Gg in 2019. The results improve our understanding of carbonyl compound emissions from agricultural machines in China.

Multi-pollutant emission characteristics of non-road construction equipment based on real-world measurement.

Non-road construction equipment (NRCE) has become a crucial contributor to urban air pollution. However, the current research on NRCE is still in its infancy, and the understanding of its pollutant emissions is not yet clear. In this study, multi-pollutant (CO, HC, NOx, PM2.5, and BC) and CO2 emissions from 12 excavators and 9 loaders under real-world conditions are investigated by using a synchronous platform based on portable emission measurement system (SP-PEMS). We find the instantaneous emission rates of multi-pollutant present significant variability under different operation modes, and pollutant emissions are significantly high under cold start. Generally, multi-pollutant emission factors (EFs) have been all effectively reduced with the tightening of emission standards except for CO and NOx. The BC and PM2.5 emissions are significantly affected by engine types, and those emitted by electronically-controlled fuel injection (EI) engines are at lower concentration levels compared with mechanical fuel injection (MI) engines. The mass ratios of BC/PM2.5 for EI engines are 2.05 times that for MI engines on average. Through comparison, we find the multi-pollutant EFs of NRCE reported by different studies and the Guide vary greatly, and those recommended by the Guide may be overestimated or underestimated to varying degrees. Finally, we recommend the multi-pollutant EFs of NRCE under different emission standards by combining the results of various studies, and which will provide scientific support for the accurately establish of emission inventory.

Multi-type emission factors quantification of black carbon from agricultural machinery based on the whole tillage processes in China.

Black carbon (BC), as one of the short-lived climate pollutants, is becoming more prominent contribution from non-road mobile source, especially for agricultural machinery (AM) in China. However, the understanding of BC emissions from AM is still not clear, and the BC emission factors (EFs) are also limited. In this study, we conducted real-world measurements on twenty AM to investigate the instantaneous BC emission characteristics and quantify BC EFs under the whole tillage processes. We find the instantaneous BC emissions and fuel consumptions are obvious differences and present good synchronization under different tillage processes. Multi-type (CO2-, fuel-, distance-, time-, and area-based) EFs of BC are developed, which are significantly affected by different tillage processes and emission standards of the used AM. While AM conducting rotary tillage, ploughing, harvest corn and harvest wheat on the same area of land, total BC emissions by using the China III emission standard AM will be reduced by 56%, 36%, 88%, and 87% than those by using China II emission standard AM, respectively. Furthermore, for corn and wheat production under the whole tillage processes, BC EFs are 16.90 (6.03-39.12) g/hm2 and 18.18 (5.91-38.69) g/hm2, CO2 EFs are 112.64 (72.07-195.98) g/hm2 and 103.72 (71.47-167.02) g/hm2, respectively. We estimate the BC and CO2 emissions from wheat and corn productions based on the average area-based EFs. The large fluctuation ranges of BC and CO2 emissions in different tillage processes and the whole processes can reflect that the use of AM in China is uneven. It also indicates that there is a large space for BC and CO2 emission reduction and optimization. Therefore, more attention should be paid to the control of BC and CO2 emissions from AM. We believe that the recommended multi-type EFs are applicable for the quantification of BC emissions from AM in China and other countries.

Heavy metal levels in milk and dairy products and health risk assessment: A systematic review of studies in China.

Previous studies have indicated that heavy metal levels in milk vary partly depending on environmental metal concentrations. Given the increasing consumption of milk in China, it is essential to pay attention to milk safety. We performed a systematic review of relevant published studies to evaluate the heavy metal levels in milk and dairy products and the associated health risks, discuss environmental sources of heavy metals, and propose future research directions. A literature search was implemented in the Web of Science Core Collection and PubMed using multiple keywords such as "metal," "milk," "dairy products," and "China". A total of 16 published studies that analyzed metal levels in milk and dairy products in 20 provincial administrative regions were included. Most studies detected toxic heavy metals in milk and dairy products samples, including mercury, lead, cadmium, chromium, and arsenic. The lead concentration in milk from these studies did not exceed the Chinese standard for milk. However, three studies detected relatively high lead levels in both commercial and raw milk, exceeding the European Commission standard. The polluted environment surrounding the farm, feed, and packaging materials are likely sources of metals in milk and dairy products. The hazard index for the 11 analyzed metal elements in milk and dairy products was lower than 1, indicating negligible non-carcinogenic health risks from exposure to these metals. Children are at a higher risk than adults. This review illustrates that research in this field is limited to China. More research should be conducted in the future, such as evaluating the contribution of each environmental source of metal in milk and dairy products.